Communicate With The Ag-Star Using Bluetooth Wireless Technology; Properties - Services Tab - Novatel AG-Star User Manual

Bluetooth Configuration
3. Click the Services tab. The Services tab displays the serial port information about the Bluetooth link to
the AG-Star. See Figure 20 on page 34.
4.4

Communicate with the AG-Star Using Bluetooth Wireless Technology

1. Open a terminal program (HyperTerminal, for example) and configure it to the serial port assigned to the
Bluetooth link. If you do not know the serial port information, see Section 4.3, Determining the Bluetooth
Serial Port on page 31.
2. Configure the port settings as follows:
9600 bps, no parity, 8 data bits, 1 stop bit, no handshaking, echo off
3. Through the terminal program, connect to the Bluetooth serial port and verify the connection.
4. Type the following VERSION log request into the command prompt to ensure that the connection works:
log version
AG-Star User Manual Rev 4
Figure 20: Properties - Services Tab
Chapter 4
34