Novatel AG-Star User Manual page 42

NovAtel Firmware and Software
AUTH
3. Issue the
Authorization Code on page 36 for details on obtaining any auth-code). The syntax is as follows:
auth <your auth-code here>
where auth is a command that enables model upgrades and auth-code is the upgrade authorization code,
expressed as follows:
XXXXXX,XXXXXX,XXXXXX,XXXXXX,XXXXXX,MODEL,EXPDATE
where:
1. Each X character is a case-insensitive ASCII character.
2. The MODEL string is a maximum of 15 characters long and represents the model enabled by the auth-
code.
3. The EXPDATE string is the auth-code's expiry date, in YYMMDD format
Example:
auth 7WBMBK,887CB6,K5J3FH,5DF5P2,42PW8G,D1SB0GTT0,121211
AUTH
When the command is executed, the receiver reboots. Issuing the
confirms the new upgrade model type and firmware version number.
If communicating using NovAtel Connect, the communication path must be closed and reopened using the
Device menu.
AG-Star User Manual Rev 4
command, followed by the auth-code and model type (refer to Section 5.2,
LOG VERSION
command
Chapter 5
42