B.6 Selectchanconfig Set Channel Configuration - Novatel AG-Star User Manual

B.6 SELECTCHANCONFIG Set channel configuration


The SELECTCHANCONFIG command should only be used by advanced users.
This command changes the channel configuration used on the AG-Star receiver. It causes an immediate
software reset. See Table 14, AG-Star Channel Configuration Sets on page 59 for a list of available channel
configurations.
 Configurations containing GLONASS channels are only available when the AG-Star has the
GLONASS option enabled in the model.
Message ID: 1149
Abbreviated ASCII Syntax:
SELECTCHANCONFIG [set]
Factory Default (without GLONASS option):
selectchanconfig 2
Factory Default (with GLONASS option):
selectchanconfig 3
Abbreviated ASCII Example:
selectchanconfig 2
Field Field Type
1 SELECTCHANCONFIG
header
2 target
AG-Star User Manual Rev 4
ASCII Binary
Value Value
- -
See Table 14, AG-Star
Channel Configuration
Sets on page 59
Description
This field contains the
command name or the
message header
depending on whether the
command is abbreviated
ASCII, ASCII or binary.
Channel configuration set
Binary Binary Binary
Format Bytes Offset
- H 0
Ulong 4 H
58