Table of Contents
Advertisement
Config Screen
Record Type (1.1):
Progressive Playback (1.3):
In Convert (1.4):
Out Convert (1.5):
SDI Out (1.6):
3G SDI Level (1.64):
HDMI Out (1.66):
SDI/HDMI Monitor Output (1.8):
Ki Pro Quad v5.2r3
The Config screen is a general purpose screen used to configure Ki Pro Quad's I/O, and
also set up Ki Pro Quad's environment (name, clock settings, display etc.)
Figure 12. Ki Pro Quad Web Interface, Config Screen
NOTE:
In the following web screen control definitions, the number in parentheses refers to the
Parameter descriptions in Chapter 2—you can read more information there about the
choices and their meanings.
Record Type can be configured to record the incoming video signal in a "NORMAL"
manner, as a "PsF" signal (if the incoming source is 1080psf 29.97 for example), or VFR for
variable framerate recording of an applicable input (such as the output of Panasonic
Varicam).
This parameter defines whether progressive media is output as PsF or true progressive.
This parameter sets input conversion to one of the available selections. Note that the 4K
Crop to Quad HD and 4K/Quad HD to 2K/1080 selections have no impact if 2K or 1080
video is input.
This parameter sets output conversion to one of the available selections.
This parameter sets the SDI output format.
This parameter configures the SDI output for Level A or Level B.
This parameter whether scaled or full raster video will be output.
NOTE:
The Full Raster selection only has an impact on the output when a 4K or Quad HD video
source is used.
Sets the format of the SDI/HDMI Monitor outputs.
61
www.aja.com
Advertisement
Table of Contents
