Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AJA KiPRO quad
Summary of Contents for AJA KiPRO quad
-
Page 1: Quick Start Guide
Quick Start Guide Published: March 14, 2013 ®... -
Page 2: Front Panel
Ki Pro Quad - Quick Start Guide Introduction This guide is intended as a basic overview of the AJA Ki Pro Quad setup and operation. A complete Installation and Operation Guide can be downloaded from the Ki Pro Quad support section of the AJA website: www.aja.com/en/support/kiproquad... - Page 3 Rear Panel Workflow Diagram 2AJA KiPro Quad Quick Start v1.0 www.aja.com...
-
Page 4: Operator Side
This feature allows the knobs to be recessed, preventing accidental changes in a production environment. To adjust headphone listening level, press the knob inward and the knob will then pop out for easy adjustment just like the audio input level knobs. 3AJA KiPro Quad Quick Start v1.0 www.aja.com... - Page 5 Successive pushes increase the speed to 2x, 4x, 8x, and 16x. (Pushing the button after 16x speed is reached has no further effect.) When playing in reverse, audio is muted for all speeds. 4AJA KiPro Quad Quick Start v1.0 www.aja.com...
- Page 6 Not using the SLOT button to unmount Pak media can lead to issues with the media and possibly even damage the media. Do not remove Pak media when the Slot LED is lit or while it is flashing. 5AJA KiPro Quad Quick Start v1.0 www.aja.com...
- Page 7 29.97fps or lower. The Ki Pro Quad can be used as a pass-through or “debayer converter” device for 4K or Quad HD 50fps and 59.94fps signals. 6AJA KiPro Quad Quick Start v1.0 www.aja.com...
-
Page 8: Video Input
Uses the value specified in parameter 8.1 TC Value SDI RP188 Uses the value from the SDI input Uses the value from the LTC input Time of Day Sets timecode to the device clock value (55.6 Time Set) 7AJA KiPro Quad Quick Start v1.0 www.aja.com... - Page 9 For detailed information about clip naming conventions, refer to the complete Ki Pro Quad Installation and Operation Guide. Inserting Pak The AJA Ki Pro Quad works with AJA Pak solid state media. AJA Pak media should be inserted into the Ki Pro Quad with the AJA logo facing upright. Media into the Media is keyed so that it cannot be inserted backwards.
- Page 10 When Pak media has been removed from the Ki Pro Quad, it may be connected to a computer using the AJA Pak Dock. The AJA Pak Dock is a media reader for use with AJA Pak solid state Recorded by the media.
-
Page 11: Technical Support
Quad Installation and Operation Guide for more detailed information regarding configuration and operational guidelines. If issues still persist after reviewing the detailed information, please feel free to contact AJA Technical Support. Technical Support is available free of charge to all AJA customers. Our support engineers will work with you to troubleshoot any issues and can provide advanced replacement of Ki Pro Quad, Pak Dock and Pak media, if necessary.