Table of Contents
Advertisement
55.6 TIME SET
70.2 DISPLAY
INTENSITY
70.3 FAN SPEED
80.1SERIAL NUMBER
80.2 SW VERSION
91.1 RECALL PRESET
92.1 STORE PRESET
Ki Pro Quad v5.2r3
This parameter manually sets the calendar date of the internal Ki Pro Quad clock, when
setting manually (NTP not used).
variable
This parameter determines the brightness of the alphanumeric LCD display and front
panel backlit buttons. A dimmer display uses less power.
variable
This parameter determines the speed of Ki Pro Quad's internal cooling fan. In some
environments where audio recording is occurring close to the Ki Pro Quad unit, it may be
desirable to set the fan speed to "QUIET AUTO" for optimum quiet operation during
recording.
NORMAL (default)
QUIET AUTO
NORMAL AUTO
This parameter displays this Ki Pro Quad's unique serial number.
This parameter displays Ki Pro Quad's software version level.
This parameter recalls the Ki Pro Quad to a previously saved preset configuration stored
using parameter 92.1. Use the ADJUST buttons to set the number of the Preset register
you wish to recall. To recall, press the SELECT up (^) button, and then press the ADJUST
up (^) button. The message [COMPLETE] is displayed after a successful recall.
This parameter saves a preset configuration to the selected storage register. Use the
ADJUST buttons to set the number of the Preset register. To store, press the SELECT up (^)
button, and then press the ADJUST up (^) button. The message [COMPLETE] is displayed
after a successful store.
Using the adjust buttons, enter a time for Ki Pro Quad's clock.
Using the adjust buttons and the top Select button, select
the characters for each digit (hours/minutes). The adjust
buttons scroll through the choices and the top Select
button advances to the next character. While selecting
characters, the character being changed will flash to show
its position. When finished, the final press of the SELECT up
button will flash the whole value, hit SELECT once more to
confirm and the next menu parameter will appear. Time is
set using a 24 hour format (military) and must be set to
GMT time.
NOTE: there are many websites that will assist you in
converting your local regional time to GMT (UTC). AJA does
not endorse any particular one, but here are two examples:
http://tycho.usno.navy.mil/zones.html
http://hurricanes.noaa.gov/zulu-utc.html
Using the adjust buttons, you can dim or brighten the
alphanumeric display and activity indicator LEDs in steps
from 1 (dim) to 8 (brightest)
Default: 6
Fan runs at normal fixed speed for optimum cooling.
Fan runs at normal speed until recording begins; then the
fan ramps down to a slower speed for optimum quiet.
Fan runs at variable speeds for optimum cooling.
55
www.aja.com
Advertisement
Table of Contents
