Table of Contents
Advertisement
TRANSPORT Mode (default)
Ki Pro Quad v5.2r3
For the MENU mode, depressing one of the 3 MENU buttons (STATUS, CONFIG, or MEDIA)
will enter the corresponding menu.
In the STATUS menu, the Select buttons will cycle through the various STATUS screens.
The Adjust buttons have no effect on the STATUS menu.
The first STATUS page shows the status of recording or playing. The second page shows
the timecode settings for recording as set in CONFIG parameter 8.0. The third Status page
shows Interval Recording status. The following shows the display for the STATUS menu:
Input Format
Recording Format
STATUS Menu (Record Mode)
Media Format
Output Conversion
STATUS Menu (Play Mode)
Interval Record Enabled
Interval Frames: 1
STATUS Menu (Interval Record))
In the CONFIG or MEDIA menus, the Select buttons select various adjustable parameters,
and the Adjust buttons adjust the selected parameter. When entering a menu, the
system remembers and returns to the last selected parameter. The following shows the
displays for the CONFIG and MEDIA menus
Parameter number Parameter Name
Parameter setting (chosen by Adjust buttons)
CONFIG Menu
Parameter number Parameter Name
Parameter setting (chosen by Adjust buttons)
MEDIA Menu (like CONFIG)
TRANSPORT mode is the default mode for Ki Pro Quad operation. When you power up Ki
Pro Quad, the first display you'll see is TRANSPORT mode menu. Any clip that previously
was recorded is referenced in the display and can be played.
If the screen saver is on, pushing one of the transport buttons in the middle of the front
panel (PLAY, STOP, FF, REV, REC) dismisses the screen saver and returns to the current
display. A second press, or a first press if the screen saver is already off, immediately takes
action and causes the display to change to the TRANSPORT mode if it is not already
Input selected
Audio input selected
Time: Second
29
www.aja.com
Advertisement
Table of Contents
