Table of Contents
Advertisement
IMPORTANT:
IMPORTANT:
All Clips and Media
State > Data-LAN
Ki Pro Quad v5.2r3
NOTE:
AJA recommends that presets only be used between the same types of devices. In other words,
only use presets from Ki Pro Quads with other Ki Pro Quads, not with Ki Pros.
At any time you may perform a recall of the Factory Settings if you have presets enabled.
Presets do survive device reboots. If you want to be sure that your device does not have
someone else's settings in place, you can perform a recall of Factory Settings prior to
configuring and working with the Ki Pro Quad.
Presets may be saved and recalled from the front panel UI. However, AJA recommends
using the web UI to work with presets since more options are available.
Custom naming of presets is not possible from the front panel UI; presets will have their
default names of "Preset 1," Preset 2," etc. To recall a preset from the front panel UI, navigate to
CONFIG menu parameter 91.1 Recall Preset. Use the ADJUST up/down buttons to select a
preset. Use the SELECT up button to choose a specific preset and the ADJUST up button to
recall the preset. To abort recalling a preset, press the select down button.
To save a preset, navigate to CONFIG menu parameter 92.1 Store Preset. Use the ADJUST
up/down buttons to select a preset. Use the SELECT up button to choose a specific preset
and the ADJUST up button to store the Preset. To abort a preset recall, press SELECT down.
HINT:
In both CONFIG menu parameters 91.1 and 92.1, you can tell if you are navigating through
the presets if you see the leading numeric characters flashing. Again, use the SELECT down
button to exit these menu parameters.
If the Ki Pro Quad is configured for Media State > Data-LAN, appropriately encoded
QuickTime files may be uploaded to the Ki Pro Quad or downloaded from the Ki Pro Quad
via the All Clips portion of the interface. (See
encoding requirements.)
""Appropriately Encoded
79
Clips"" for clip
www.aja.com
Advertisement
Table of Contents
