Using Presets - AJA Ki Pro Quad Installation & Operation Manual

IMPORTANT:
Playback of a Playlist

Using Presets

Ki Pro Quad v5.2r3
To reorder clips within a list, just click and drag them. You will notice that the clip is
selected because the filmstrip icon will appear and you will know that a reorder is
happening when you see the green highlight appear.
A clip cannot be moved to the last position of the playlist. To move a clip to the last position in
the playlist, move it to the next to last position in the list and move the last clip in the list
above it.
You may create multiple playlists. Playlists are stored as a simple file on the Ki Pro media
alongside the clips.
If you want to play a playlist you have created, first select Play Media>Playlist in the
Media menu parameters. (Note: depending on whether you have been reviewing clips,
you may first be prompted to "Press Stop" prior to entering the Media page to make
Playlist selections; if this prompt appears, you will be led to the Transport page where
you can depress stop and then enter the Media page.)
Select a playlist from the Playlist parameter in the Media menu. Once a playlist is selected,
you will noticed that a double arrow indication will appear next to the selected list in the
Playlists portion of the web UI. If you go to the Transport portion of the web UI, you will
now notice that the playlist is cued up, ready for playback of the first clip in the list. If you
want to navigate within your list, you may use the fast forward and rewind buttons or the
select up/down buttons. You can loop playback of a list using the Media menu
parameters as well.
Management of the playlists is made possible via the web UI; creation and management
of playlists from the front panel is not supported. An indication of a selected playlist is
presented on the front panel UI via menu parameter 15.3 Playlist. The selection of a
playlist does not survive reboots of the unit, but the playlists that are created do survive
reboots.
Ki Pro Quad offers a simple and efficient way to configure multiple parameters of the
device from a preset. You can store a preset configuration and then recall that preset later
to return Ki Pro Quad to the stored configuration.
77 www.aja.com