Table of Contents
Advertisement
General Screen
Information
Menu of Ki Pro Screens:
Click one to Display
that Screen
Alarms appear here
Ki Pro Quad v5.2r3
If 50.1 is set to DHCP, and the DHCP server on the network fails to grant an IP address,
then Ki Pro Quad will fall back to the static IP address.
If 50.1 is set to Default Addr, the factory default static IP address is: 10.65.74.65.
So, if 50.1 is set to Default Addr, you would type the following in the web browser:
http://10.65.74.65 to see Ki Pro Quad's web interface Main Status screen.
Figure 11. Ki Pro Quad Web Interface, Status Screen
Selections and Information
All Ki Pro Quad web screens have certain areas in common. On the left of each screen is a
Menu panel listing all the available Ki Pro Quad screen choices. Click any of these items to
jump to that screen. On the right side of each screen you'll also find a Connection panel.
This area shows the connection status in addition to the Ki Pro Quad's serial number and
software version. This latter information is useful if you ever have to call AJA Technical
Support to discuss a problem or get help. Below the Connection panel, the Network
panel shows the Ki Pro systems on the network and allows you to switch control between
systems. See
"Controlling Multiple Ki Pro Quads" on page 73
additional information on using multiple Ki Pros. In the middle of each screen are menu
choices and information pertaining to the subject matter of that screen.
Ki Pro Quad web screens closely mirror the parameter menus displayed on its front panel.
In each of the screens presented on the following pages, we'll list the parameter menu
numbers that are related so you can read the full definitions. Additionally, the Status
screen lets you change parameter settings right on the screen if you right-click the
setting.
60
S/N, software version
and connection status
List of Ki Pros on the LAN:
Click arrow icon to expand/collapse
Click gear icon for settings
at the end of this chapter for
www.aja.com
Advertisement
Table of Contents
