Table of Contents
Advertisement
Media Screen
Media State (12.1):
Rollover (12.2):
Encode Type (14.1):
Play Media (15.1):
Loop Play (15.2):
Playlist (15.3):
Dropped Frames (15.4):
Format Media (16.1):
Reel Name (17.0):
Clip Name (17.2):
Clip Number (17.3):
Ki Pro Quad v5.2r3
This screen offers settings for a variety of media-related functions, including formatting
storage media, type of Apple ProRes encoding, and reel and clip definitions.
Figure 13. Ki Pro Quad Web Interface, Media Screen
This parameter defines whether the media is used for video/audio recording or data
transfer using Ethernet LAN.
This parameter enables or disables rollover. Rollover allows media recording to continue
onto a second piece of media. See Chapter 4 for details about this feature.
This parameter defines the Apple ProRes encoding method.
This parameter determines behavior during playback: one clip will play when Play is
selected, or all clips will be played, or the clips in the playlist will be played. See parameter
15.1, Play Media, in Chapter 3 for more details about this feature.
This parameter turns looped playback on and off.
This parameter displays the name of the selected playlist (if any).
This parameter determines how playback handles dropped frames.
This parameter is used to format the currently selected storage device.
The reel name is a number between 1 and 999; it also determines the name of the media
when formatting media. To enter a specific value, click on the number to highlight it, type
in a value, and press Enter to confirm the new value. You may also click and drag on the
slider to make adjustments. To increment by single values using the slider, click the slider
to highlight it, and then press the "back" arrow or "forward" arrow on your keyboard.
This parameter determines the clip name associated with all clips generated while using
this setting. The clip name is either "Clip" or "SC".
This parameter determines the clip number, from 1 to 999, that follows the CLIP NAME,
and is associated with all clips generated while using this setting. To enter a specific
value, click on the number to highlight it, type in a value, and press Enter to confirm the
new value. You may also click and drag on the slider to make adjustments. To increment
by single values using the slider, click the slider to highlight it, and then press the "back"
arrow or "forward" arrow on your keyboard.
64
www.aja.com
Advertisement
Table of Contents
