Table of Contents
Advertisement
15.4 DROPPED FRAMES
16.1 FORMAT MEDIA
16.2 DELETE CLIPS
17.0 REEL NAME
17.2 CLIP NAME
Clip Naming—Two
Examples
Ki Pro Quad v5.2r3
This parameter determines how playback handles dropped frames. These are the
options:
CONTINUE
STOP
This parameter is used to format the currently selected media. These are the options:
KEEP MEDIA (default)
FORMAT MEDIA
This parameter can be used to delete all of the clips on the media. These are the options:
KEEP CLIPS (default)
DELETE ALL
Ki Pro Quad media can be used to hold data other than Apple ProRes QuickTime
recordings. If other files are saved to the PAK media, they should be placed outside of the
"AJA" folder. Any material inside of the "AJA" folder will be erased if a MEDIA>Delete
Clips>DELETE ALL is performed.
This parameter determines the reel name associated with all clips generated while using
this setting. These are the options:
001 to 999
(default = 001)
The reel name is a number between 001 and 999. It is historically linked to the naming
conventions used for film and tape-based media. The REEL NAME is an incrementing
three digit value that works with EDLs. For this reason, the parameter does not have a
"NONE" selection—all clips will be associated with a REEL NAME. The REEL NAME
parameter determines the name that the media will have if it is formatted and will appear
when the media is mounted on a computer.
This parameter determines the clip name associated with all clips generated while using
this setting. The clip name is either "Clip" or "SC". These are the options:
SC (default)
Clip
The following two examples show how clip names are generated. Each example is based
on the collective settings for these parameters:
• REEL NAME
• CLIP NAME
• CLIP NUMBER
• CLIP NUMBER APPEND
In the unlikely event that the playback of a clip(s) begins to
drop frames, this parameter allows users to define whether
the playback continues or stops.
No action (do not format the media selected)
Format the selected media (you will be prompted Confirm
Erase S1? or Confirm Erase S2?—Hold up Adjust button to
confirm))
No action (do not delete clips)
Delete all clips on the storage device when DELETE CLIPS is
pressed or Adjust up arrow is pressed and held for 2 seconds
Press ADJUST button up or down to change the REEL NAME
value from 001 to 999.
Clips generated will have filenames beginning with "SC"
Clips generated will have filenames beginning with "Clip"
37
www.aja.com
Advertisement
Table of Contents
