Config Screen - AJA Ki Pro Installation And Operation Manual

64
Config Screen
The Config screen is a general purpose screen used to configure Ki Pro's I/O choices,
conversion choices, and also set up Ki Pro's environment (name, clock settings, display etc.)
Ki Pro Web Interface, Config Screen
Note: In the following web screen control definitions, the number in parentheses refers to
the Parameter descriptions in Chapter 2—you can read more information there about the
choices and their meanings.
In Convert (1.4): This parameter defines the type of up, down, cross, or aspect-ratio conversion,
if any, applied to the selected input when recording.
SDI Output (1.6): This parameter defines whether the SDI output matches the file format or has
the 1.5 OUT CONVERT selection applied to it.
Component Output (1.7): This parameter defines whether the component video output
matches the file format or has the 1.5 OUT CONVERT selection applied to it.
Out Convert (1.5): This parameter defines the type of up, down, cross, or aspect-ratio
conversion, if any, applied to the output.
Record Type (1.1): This parameter defines the frame recording method of media stored.
RECORD TYPE can be configured to record the incoming video signal in a "NORMAL"
manner, as a "PsF" signal if the incoming source is 1080psf 29.97 (for example), or VFR for
variable framerate recording of the SD-SDI/HD-SDI input (such as Varicam).