Table of Contents
Advertisement
SLOT:
This button serves two purposes. First, it selects which media is accessed by the system.
Second, the SLOT button is used to unmount currently selected media.
Caution!
Not using the SLOT button to unmount the media before removal can cause problems
with the files stored on the media.
Pushing the SLOT button cycles between unmounting media and selecting media. This
function is only active when in the "STOP" mode and requires a "PRESS STOP TO
CONFIRM" if not stopped. After you select a slot, the system returns to the last selected
clip and timecode for that slot. If the media has been changed since the slot was last
selected (physically removed/media replaced), then the "first" clip on the media will be
"cued" to its start point. If inserted media has any issues, additional prompts may be
displayed as appropriate such as: "WARNING FRMT MEDIA" or "WARNING MEDIA LOW. "
Show Gang View:
When clicked, the Transport screen will be expanded at the bottom to show additional
controls for controlling multiple Ki Pros. See
"Gang Recording" on page 74
at the end of
this chapter for an additional tutorial on using this feature.
Figure 15. Ki Pro Quad Web Interface, Transport Screen—Show Gang Control
Ki Pro Quad v5.2r3
67
www.aja.com
Advertisement
Table of Contents
