Table of Contents
Advertisement
40
espresso coffee machines
For coffee preparation instructions, or for pouring hot water or dispensing steam for
hot beverages, see the USE AND MAINTENANCE MANUAL.
6. PROGRAMMING
The programming menu can be used to programme the boiler temperature, coffee
doses, hot water pouring and the temperature of the M.A.T. system (optional).
Press and hold down the "P" key for 3 seconds, the boiler temperature and the key for
continued pouring from the 1st group on the right will flash to show that the program-
Fig. 8
ming stage has commenced.
6.1 PROGRAMMING THE BOILER TEMPERATURE
Press the "+" key to increase the boiler temperature.
Press the "-" key to reduce the boiler temperature.
Temperature range 105-125°C.
6.2 PROGRAMMING DOSES
Hook the portafilter with coffee in the 1st group on the right and press the key for 1
short coffee to begin pouring.
Once the cup contains the right amount of coffee, press the 1 short coffee key to fin-
ish pouring and to store this amount for all groups.
Repeat this process for the other three coffee doses.
To programme the 2nd - 3rd - 4th group to be different from the others, press the con-
tinued delivery key for the required group and follow the procedure illustrated above.
15
LSI 024 - Rev. 01 - Ed. 10/2016
Hide quick links:
Advertisement
Table of Contents
