40
SYMBOL
TECHNICAL ASSISTANCE ACCESS SYMBOL on and FIXED (only if the SERVICE manager is enabled from the technical assistance):
When the preloaded number of solenoid intervention cycles reaches the set alarm threshold.
TECHNICAL ASSISTANCE ACCESS SYMBOL on and FLASHING (only if the FILTER manager is enabled from the technical assistance):
When the preloaded number of softener intervention cycles reaches the set alarm threshold.
PROGRAMMING ACCESS BLOCKED.
The main display reads "bc".
28
ALARM TYPE
M.A.T.
system
temperature
probe failure.
PROBLEM
M.A.T. temperature probe short
circuit or interrupted.
espresso coffee machines
POSSIBLE SOLUTION
Check the machine's M.A.T.
system.
Take note!
When this alarm is triggered,
it is in any case possible to
automatically emulsify the
milk by holding down the
M.A.T. delivery button, until
the required temperature is
reached. Releasing the but-
ton will interrupt delivery.
LSI 024 - Rev. 01 - Ed. 10/2016