Lock / Timer Module (Optional); Programming - La Spaziale S1 Vivaldi User Manual

4
This additional module serves to set the time for the appliance to switch on and off for each day of the
week.
Plug the appliance into the mains power; this way even with the appliance on standby, the clock module
(TIMER) will be powered and the display will show the logo «La Spaziale» for 3 seconds, followed by the
software version and then the current time and date.
If the timer is set, instead of the date it is possible to see the time that the appliance will next switch on if it
is switched off ( ON 14:30 ), or the time that the appliance will next switch off if it is on ( OFF 21:30 ).

N. B.
This only happens if the operations will occur before midnight of the current day.
If the Timer is not set, the message "TimerOff" will be shown under the time.
4.1

PROGRAMMING

When the is pressed and held down for 3 seconds from the main screen, the display will read:
OK
Using the
To set one of the three possible choices, stop at the required screen and press the
12
LSC 008 -UK- REV. 04
CLOCK / TIMER MODULE (Optional)
buttons, it is possible to select the other possible settings, which are:
14 : 20
27-10-06
Select
Timer
Select
Language
Select
Clock
USE AND MAINTENANCE
button.
OK