Table of Contents
Advertisement
espresso coffee machines
Danger!
INSTALLATION OF THE WATER SOFTENER IS RECOMMENDED TO PROLONG THE LIFE OF THE MACHINE.
Before installing the machine, check the hardness of the water and fit a softener based on the instructions of the manufacturer
and to standards and regulations in force.
Proceed to programme the automatic and/or volumetric softeners according to the manufacturer's instructions.
Danger!
If a water softener is not a part of the water system, it is necessary to apply a filter to the inlet hose of the motor pump to avoid
the entry of impurities that could damage the motor pump or the machine.
Attention!
The motor pump must be installed at a distance to avoid drips or spurts of water and also to avoid salt from dropping onto the
motor pump when filling the water softener with salt.
Before connecting the hose coming from the motor pump or from the water-softener, in case of appliances with built-in
pumps, place it in a bucket and turn on the water tap (1- Fig. 5) for a couple of minutes in order to eliminate possible residues
from the new hoses and in any case, until the water flows clear.
4.3 DRAINAGE SYSTEM
Assemble the push-fit drainage hose in the appropriate rubber holder of the collection basin of the machine and place the other end of
the hose directly into the drainage u-pipe of the prearranged drainage system.
Check that the hose is not blocked or crushed along its length and it also has a sufficient incline to be able to drain without difficulty.
Danger!
Do not place the drainage hose in basins or buckets underneath the counter to avoid the possibility of creating receptacles of
dirt with the consequent proliferation of bacteria.
LSI 024 - Rev. 01 - Ed. 10/2016
40
13
Hide quick links:
Advertisement
Table of Contents
