La Spaziale S50 Manual For Use And Maintenance
  1. Manuals
  2. Brands
  3. La Spaziale Manuals
  4. Coffee Maker
  5. S50
  6. Manual for use and maintenance

La Spaziale S50 Manual For Use And Maintenance

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MANUAL FOR USE AND MAINTENANCE
EN LSC 050 06-2020

Advertisement

Table of Contents
loading

Related Manuals for La Spaziale S50

Summary of Contents for La Spaziale S50

  • Page 1 MANUAL FOR USE AND MAINTENANCE EN LSC 050 06-2020...
  • Page 2 WEEE Disposal of equipment by the users in the territory of the European Union (WEEE), according to standards 2011/65 / EU, 2011/19 / EU and 2015/863 / EU, relating to the reduction of the use of dangerous substances in electrical and electronic equipment, as well as waste disposal. The symbol of the crossed waste bin indicated on the equipment or on the packaging means that the product at the end of its lifetime must be disposed of separately from all the other waste.

  • Page 3: Safety Norms

    GENERAL WARNINGS Read carefully the instructions and warnings contained in this manual and in the “ INSTRUCTION MANUAL FOR THE INSTALLER ”, since they provide important indications concerning the installation of the appliance. Attention! The electric system, water supply system, drainage system MUST already be put in place by the customer in order to allow the proper installation of the machine.
  • Page 4 Danger! The electrical safety of the appliance is fully achieved only after it has been correctly connected to an earthing system as required by the laws in force. use. It must only be operated in a place where the ambient temperature is between +5°C and +40°C . Attention! The use of any electrical appliance also requires observance of the following important regulations.

  • Page 5: Installation Requirements For The User

    • The appliance has class I protection against electric shocks. • The noise emitted by the appliance during normal operation is less than 70 dB . • The maximum altitude at which the machine may be installed is 8000 meters . •...
  • Page 6 • Between the water mains and the water inlet pipe of the appliance, there must be a tap to stop the water flow if necessary (2 - Pict. 1) Water mains pressure must be within the range of If this requirement is not met, please consult the manufacturer. •...

  • Page 7: Table Of Contents

    INDICE 6. PROGRAMMING OF THE MACHINE............21 GENERAL WARNINGS ..................III 6.1 SETTINGS MENU..................22 SAFETY NORMS....................III 6.2 LANGUAGE....................22 INSTALLATION REQUIREMENTS FOR THE USER.........V 6.3 DATE TIME....................23 6.4 TIMER......................24 1. GENERAL DESCRIPTION OF THE MACHINE........2 6.5 COFFEE DELIVERY TIME CONTROL MENU........26 1.1 GENERAL DESCRIPTION OF THE SIDE PANEL........3 6.6 SETUP MENU...................28 1.2 GENERAL DESCRIPTION OF THE MAIN DISPLAY......4 6.7 BOILER PRESSURE..................28...

  • Page 8: General Description Of The Machine

    1. GENERAL DESCRIPTION OF THE MACHINE LEGEND: 1. Left steam lever 5. Right steam lever 9. Right front foot 13. Left front foot 2. 2° group display 6. Right steam wand 10. Main switch 14. Left steam wand 3. Main display 7.

  • Page 9: General Description Of The Side Panel

    1.1 GENERAL DESCRIPTION OF THE SIDE PANEL LEGEND: 17. Cold white led for right side 21. RGB Led for left side 18. RGB led for right side 22. Cold white led for left side 19. RGB led for right back foot 23.

  • Page 10: General Description Of The Main Display

    1.2 GENERAL DESCRIPTION OF THE MAIN DISPLAY LEGEND: A. Programming touch button E. M.A.T. 1° sel button I. Group cleaning button O. Hot Water 1° sel button B. Date & Time F. M.A.T. 2° sel button L. ECO button P. Hot water 2° sel button C.

  • Page 11: General Description Of The Status Bar

    1.3 GENERAL DESCRIPTION OF THE STATUS BAR LEGEND OF SYMBOLS IN THE STATUS BAR: E.G.S. Electronic Ground System: enabling this function , in case of no activity of the delivery groups for 30 minutes, a minimal hot water quantity is delivered inside the portafilter to keep the coffee cake humid inside so as to remove it easily. The signal that the cycle is starting is a 30”...
  • Page 12 Indication of the electric heater control: after 20 minutes of inactivity of the machine (that means with no coffee, water, steam nor M.A.T. delivery) the total power input of the machine is reduced to 2/3 so as to solely maintain the operating temperature. As soon as a new delivery is required, the “Economy”...

  • Page 13: General Description Of The Delivery Group Display

    1.4 GENERAL DESCRIPTION OF THE DELIVERY GROUP DISPLAY SELETRON VERSION 3.0 VERSION LEGEND: a. Free Flow touch button. d. Purge.touch button b. Long coffee button e. Double short coffee button c. Double long coffee button f. Short coffee button g. Temperature SET ITC 3.0 indication EN LSC 050 06-2020...

  • Page 14: Labels And Warning Plates

    2. LABELS AND WARNING PLATES In the picture here below we are showing the labels and warning technical data plates applied on the machine. Attention! Dedicate all the time necessary to get familiar with these labels/plates. Make sure that they are all readable and for this purpose clean or replace those which are damaged or not readeable (both in the text and in the graphics).

  • Page 15: Packaging Removal

    3. PACKAGING REMOVAL After removing the packaging, check the integrity of the appliance, in case of any doubt do not use it and contact the manufacturer. Packaging materials must not be left within the reach of children reach as they may represent a potential danger. Attention! As the appliance has a weight higher than 30Kg, it cannot be lifted by one person alone.

  • Page 16: Optional Accessories

    3.2 OPTIONAL ACCESSORIES (supplied only on request of the customer) LEGEND: I. Water softener L. Water mains impurity filter M. Pressure Reducer N. Detergent 4. STARTING THE SYSTEM Open water mains Check any water leaks from Turn on main switch pipes EN LSC 050 06-2020...

  • Page 17: Electric Switching On Of The Appliance

    5. ELECTRIC SWITCHING ON OF THE APPLIANCE Press the main switch (10 pag. 2) The machine refills the boiler with water. Wait for the machine to reach the operating pressure indicated by the green triangle. Attach the portafilter to the group. Open the valves by pulling the levers.

  • Page 18: Coffee Brewing

    5.1 COFFEE BREWING Remove one portafilter from the Fill the portafilter with ground coffee Firmly attach the portafilter to the group. and press it. group. Place one or two coffee cups below Press one of the preset dose buttons In case of free flow delivery, the or the free flow delivery.
  • Page 19 In case of preset doses, the display A progressive white circular bar will In the ITC 3.0 version, the water shows the programmed time (in show if the preset time has been extraction temperature is indicated green on the left) and the real reached (green triangle).

  • Page 20: Hot Water Delivery For Infusions

    5.2 HOT WATER DELIVERY FOR INFUSIONS Press the button on the top left hand Or press the button on the bottom Place the jug below the hot water spout. side (P, page 4) to deliver hot water. left hand side (O, page 4) to deliver The delivery stops at the end of the mixed hot water.

  • Page 21: Hot Water Delivery For Hot Beverages

    5.3 HOT WATER DELIVERY FOR HOT BEVERAGES Push the Steam valve lever to purge. Insert the steam wand into the jug Pull the lever of the steam wand to containing the beverage start heating the beverage. At the to be heated. end, move back the lever to the initial position.

  • Page 22: Electric Cup Warmer

    5.4 ELETTRIC CUP WARMER To obtain a better preheating of the cups, it is possible to switch on the electric cup warmer. Set the new temperature and push The display shows a pop-up that Push the electric cup warmer button. “save”...

  • Page 23: Economy Mode

    5.5 ECONOMY MODE The ECONOMY mode enables to obtain a remarkable energy savings when the machine is on but not fully operational. With the ECONOMY function active, all delivery function Push the ECO button. of coffee, tea and steam (M.A.T.) are disabled. The RGB LEDs on the feet and The boiler temperature reaches 85°C.

  • Page 24: Washing The Groups

    5.6 WASHING THE GROUPS The GROUP CLEANING function enables to clean the group showers without increasing the coffee counters. Push GROUP CLEANING button. Push ACTIVATE button to activate the GROUP CLEANING cycle. The GROUP CLEANING cycle consists of 5 seconds of water delivery Press the DEACTIVATE button to stop the cleaning cycle.

  • Page 25: Boiler Washing Function

    5.7 BOILER WASHING FUNCTION The BOILER WASHING function allows to partially replace the water inside the boiler. Push the BOILER WASHING button. The machine is dispensing hot water Press BOILER WASHING button again for 2 minutes from the spout and then to interrupt the washing cycle in automatically refills the water into advance.

  • Page 26: Cleaning Function

    5.8 CLEANING FUNCTION The CLEANING function temporarily disables the capacitive display, thus allowing to clean the glass. Push the CLEANING button. Push “YES’”. For 30” the capacitive displays are disabled. After completion the displays will show the work screen again. EN LSC 050 06-2020...

  • Page 27: Programming Of The Machine

    6 PROGRAMMING OF THE MACHINE Compared to what is described below, the programming may differ in some menus, depending on the settings made during installation and on the firmware version. Push “Setup” button. Display will show the secondary menu Scroll left to visualize the menu SETTINGS - TOOLS - SETUP.

  • Page 28: Settings Menu

    6.1 SETTINGS MENU Push “settings” button. Display visualizes the secondary menu “Language” and “Date Time”. 6.2 LANGUAGE “Language” function allows to set the menu and display in several languages. Push “Save” button. The main display Select the language. will power off and back on, by viewing the "HOME"...

  • Page 29: Date Time

    6.3 DATE TIME Push “Date Time” button. By using the ARROWS set the current Date Time. Confirm by pressing “Save” button. EN LSC 050 06-2020...

  • Page 30: Timer

    6.4 TIMER “Timer” function allows to turn on and off the machine automatically at a prearranged time. Push “Tools” button. Push “Timer” button. Select “ON”. Push “Edit Events” button. EN LSC 050 06-2020...
  • Page 31 Change the first "event" on the screen Select the day and the switching on by pressing on it. time and move the cursor to "ON". Confirm with "Save". To set the time and day of shutdown, press Select the day and the time of shutdown "Add event"...

  • Page 32: Coffee Delivery Time Control Menu

    The preset shutdown time can be seen If the machine has been turned off by on the status bar. the "Timer", the main display shows the preset switching on time, press yes "Disable timer" to force the switching on. 6.5 COFFEE DELIVERY TIME CONTROL MENU “Coffee delivery time control”...
  • Page 33 Select the tolerance expressed in Confirm with “Save”. seconds. During the following delivery, if the coffee extraction is within the range of time stored by the service during the installation phase +/- the selected tolerance, the progressive bar will be green. Otherwise, in case incorrect delivery time, it will turn red. EN LSC 050 06-2020...

  • Page 34: Setup Menu

    6.6 SETUP MENU Push “Setup” button. 6.7 BOILER PRESSURE Push “Boiler pressure”. Push “+” button to increase the boiler pressure. Push “-” button to decrease the boiler pressure. EN LSC 050 06-2020...

  • Page 35: Coffee Doses

    6.8 COFFEE DOSES Push the button “Coffee doses”. Push the button “Start dose setup”. Attach the portafilter with the coffee to the 1st, 2nd or 3rd group starting from the right and press the one short coffee button to start the delivery. EN LSC 050 06-2020...
  • Page 36 Once the desired amount of coffee in the cup is reached, press the same button to stop the coffee delivery. Repeat the same procedure with the other buttons. Press "Stop" at the end. The group on the right copies the doses on the other groups. In case you want to program the 2 or/3 group differently from the others, program the dose buttons of the other groups separately.

  • Page 37: Hot Water (H2O) Dose

    6.9 HOT WATER (H2O) DOSE Push the button “HOT WATER (H2O) doses”. Place a jug below the hot water spout. Press the top button (100% hot water) Once the desired amount of water in the to start the water delivery. pot is reached, press the same button to stop the water delivery and to memorize it.

  • Page 38: Info Menu

    7 INFO MENU Push “Info” button. 7.1 SOFTWARE VERSIONS “Software versions” menu allows to know the firmware versions of the various boards. The display shows the firmware versions of Push “Software versions” button power, groups and ANDROID application management. EN LSC 050 06-2020...

  • Page 39: User Guide

    7.2 USER GUIDE In the “User guide” menu it is possible to display the manual for use and maintenance. 7.3 TUTORIAL On the “Tutorial” menu it is possible to display a series of videos related to the machine. EN LSC 050 06-2020...

  • Page 40: Energy Consumption

    7.4 ENERGY CONSUMPTION In the "Energy consumption" menu it is possible to check the energy consumption of the machine, in KW/h. N.B. the displayed value may slightly differ from the amount of energy actually used. 7.5 COUNTERS In the "Counters" menu you can check the number of coffee, tea and steam deliveries (M.A.T.) dispensed by the machine. EN LSC 050 06-2020...

  • Page 41: Reset Product Counters

    7.6 RESET PRODUCT COUNTERS In the "Reset product counters" menu it is possible to reset the partial coffee, tea and steam (M.A.T.) counters. Enter the "Reset product counters" menu. Push "Reset" button. Push "Yes" button. EN LSC 050 06-2020...

  • Page 42: Customization Menu

    7.7 CUSTOMIZATION MENU 7.8 NUMBER OF SELECTIONS The "Number of selections" menu allows you to select the number of "preset dose" buttons on the group display. Push “Number of selections” button. Select "2 Selections" or "6 Selections". EN LSC 050 06-2020...
  • Page 43 Select "2 Selections" or "6 Selections" and confirm with "SAVE". 6 -dose selection touchpad layout 2 -dose selections touchpad layout EN LSC 050 06-2020...

  • Page 44: Purge Time

    7.9 PURGE TIME The “Time Purge” menu allows you to set the purge button delivery time. Push “Purge Time” button Select the required time and confirm with “Save”. EN LSC 050 06-2020...

  • Page 45: Led Rgb

    8 LED RGB The "Led RGB" menu allows you to set the colours and intensity of the LEDs on the feet and side panels. Select “Led RGB”. The cursor on top allows you to turn the RGB LEDs on or off. Select the desired colour. The RGB LEDs on the side panels and the feet will Adjust the light intensity and confirm with "Save".

  • Page 46: Led Cup Tray

    8.1 LED CUP TRAY The “Led Cup Tray” menu allows you to manage the white LEDs that illuminate the cup tray. Select “Led Cup Tray”. The cursor on top allows you to turn the Cup Tray LEDs on or off. Select the light intensity of the LEDs and confirm with "Save".

  • Page 47: Led Logo

    8.2 LED logo The "LED logo" menu allows you to manage the white LEDs of the front "LA SPAZIALE" logo. Select “LED logo”. The cursor on top allows you to turn LA SPAZIALE logo on or off. Select the light intensity and confirm with “Save”.

  • Page 48: Alarm Management

    9 ALARM MANAGEMENT MACHINE BLOCK ALARM MESSAGES They are alarms referring to GENERAL functions of the machine, originating from components/cases for which it is NOT possible to keep the other functions of the machine enabled. These alarms cause (subject to the following exceptions) a BLOCK of all the functions of the machine (coffee delivery/ hot water/M.A.T., temperature control, boiler water level control).
  • Page 49 BOILER TEMPERATURE NOT REACHED If after 15 minutes from turning on the machine, the boiler temperature sensor does not detect at least 80 °C, all machine functions are disabled. 24 VAC VOLTAGE FAILURE AT THE EV SOLENOID VALVES When the electronic control board detects the power on the transformer secondary = 0 volts for 3 consecutive seconds, all machine functions are disabled.
  • Page 50 NO BLOCK ALARM MESSAGES These alarms usually cause the block of a specific function , but all the other features of the machines are still active (coffee delivery/ hot water / M.A.T., temperature control, boiler water level control). When such messages occur a POPUP showing "MACHINE LOCK ALARM" is displayed in the main DISPLAY, followed by the description “MACHINE ALARM” followed by the description of the alarm (see image 1 ).
  • Page 51 FAULTY WATER PRESSURE SENSOR It occurs when the water pressure sensor has failed. With active alarm, the pressure value detected on the status bar is replaced by two dashes and all the alarms connected to it are silenced (MISSING WATER PRESSURE, HIGH/LOW PUMP PRESSURE). LOW PUMP PRESSURE It occurs when after 5 seconds from the delivery start, the pressure detected by the pump is <= 6 BAR.
  • Page 52 DELIVERY GROUP ALARMS They are alarms referring to specific functions connected to the DELIVERY GROUP , which in any case DO NOT cause the COFFEE DELIVERY BLOCK . When the alarm occurs , the respective message is inidcated on the display corresponding to the affected group.
  • Page 53 With active alarm, the corrisponding group is deactivated (same visualization of when ECO is actve) with the symbol TRIANGLE with exklamation point active instead of the S50 logo. You reset the alarm when the serial communication is restored by switching off and on the machine.

  • Page 54: Ordinary Maintenance By The User

    ORDINARY MAINTENANCE BY THE USER Note! instructions as to cleaning and regular maintenance. Attention! Cleaning and routine maintenance operations must be carried out by the user according to the manufacturer’s instructions given here below. Before performing any cleaning operation, make sure the machine is unplugged from the power supply. Cleaning and routine maintenance operations must be carried out when the machine is cold and using protective gloves to prevent abrasions.

  • Page 55: Every Three Days

    • Furthermore, clean the coffee delivery groups with a small brush between one dispensing and another. • Clean the drip tray and the cup grid, using the standard detergents available on the market, if necessary. 10.2 EVERY 3 DAYS After turning off the machine, remove the shower heads using the wrench provided;...
  • Page 56 Attention! Do not use water jets to clean the machine. WATER SOFTENER: If the installation of a water softener has been recommended by the installation engineer because of hard water and problems of scale deposits, it is necessary to follow the instructions of the water softener’s manufacturer (periodic regeneration).
  • Page 57 La Spaziale S.p.A. Via E. Duse, 8 40033 Casalecchio di Reno Bologna - (Italy) +39 051 611.10.11 +39 051 611.10.11 +39 051 611.10.40 info@laspaziale.com Design by LA SPAZIALE S.p.A.

Table of Contents