La Spaziale S40 Classic Installation Instructions Manual page 8

Espresso coffee machine
Hide thumbs Also See for S40 Classic:
Table of Contents

Advertisement

40
Danger!
If it becomes necessary to replace the machine's power supply cable, utilise only these types: CET ELECTRIC H07RN-F 5 x
2.5mm (400V) for 2/3 group versions, 5 x 4mm (400V) for 4 group versions - CET ELECTRIC SINGLE PHASE 3 x 2.5mm (220V)
2 group versions, 3 x 4mm (220V) for 3/4 group versions. Replacing the cable must be carried out by qualified personnel.
The electrical safety of the appliance is fully achieved only after it has been correctly connected to an earthing system as
required by the laws in force.
Danger!
The appliance must be supplied exclusively with cold drinking water. Maximum mains pressure (static pressure) must not be
higher than 0.6 MPa.
Danger!
If in doubt, concerning the above mentioned requirements (about the system previously installed by the customer), please
have them checked by qualified staff.
Danger!
The electrical safety of the appliance is fully achieved only after it has been correctly connected to an earthing system as
required by the laws in force.
Attention!
Installation must be carried out by qualified personnel according to current laws and to the manufacturer's instructions.
Incorrect installation may cause damage to people, animals or property for which the manufacturer cannot be held liable.
6
espresso coffee machines
LSI 024 - Rev. 01 - Ed. 10/2016

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S40 suprema

Table of Contents