Table of Contents
Advertisement
espresso coffee machines
Take note!
The visualization is alternatively shown on the display only if both controls have
been enabled, otherwise, only the enabled control is displayed.
The number of cycles is decreased after every 50 solenoid valve activations.
The number of litres for the filter is reduced after every 10 litres of water con-
sumed.
Setting the softener filter parameters.
To access the menu to set softener filter parameters, press and hold down all three
keys
for 3 seconds.
The display will read:
Where "0.54 ml" is the correspondence between a flow meter pulse and the amount
of water delivered by the group given in millilitres. Pressing the buttons
creases or increases the setting (0.30 ml – 0.90 ml).
Pressing the button
confirms the setting and the display will read:
LSI 024 - Rev. 01 - Ed. 10/2016
de-
40
Fig. 24
Fig. 25
Fig. 26
25
Hide quick links:
Advertisement
Table of Contents
