Programming Hot Water; Hot Water Mix Adjustment; Programming The M.a.t. System Temperature - La Spaziale S40 Classic Installation Instructions Manual

40
espresso coffee machines

6.3 PROGRAMMING HOT WATER

Press the "hot water delivery" key to commence delivery of the water. The main dis-
play will show the pouring time.
Once the required amount of water is in the jug, press the same key to stop the ongo-
ing delivery and save it to memory.

6.3.1 Hot water mix adjustment

As well as the possibility to programme the amount of hot water poured from the
wand, it is possible to adjust the temperature of the water using a flow regulator that
mixes cold water with the hot water from the tank.
To adjust the water temperature, use a screwdriver on the screw alongside the water
nozzle.
Turn the screw anticlockwise to increase the amount of cold water and as a result, to
lower the temperature of the water being poured.
Turn the screw clockwise to reduce the amount of cold water and as a result, to in-
Fig. 9
crease the temperature of the water being poured.

6.4 PROGRAMMING THE M.A.T. SYSTEM TEMPERATURE

Press the M.A.T. steam dispensing key and the display will show the temperature set
by the M.A.T. probe; press "+" to increase it or "-" to reduce it.
Temperature range from 45 to 85°C.
To quit the programming stage, press "P".
16
LSI 024 - Rev. 01 - Ed. 10/2016