Table of Contents
Advertisement
continues until the machine has reached its operating temperature (light from
flashing to fixed).
8) When the group has reached the set temperature, the boiler heating starts
(BOILER light (13) flashing), once it reaches the set temperature the light
becomes fixed.
9) Every time the group temperature or the boiler temperature drops under the set
value, the respective light starts flashing (heating phase) until the set
temperature is reached.
10) The machine is now ready.
Important Tip: To activate and deactivate the boiler mode press the
button. When the unit it turned off, then back on or even unplugged, then
plugged back in, the Mini VII will remember the last state of the Boiler mode.
When the boiler is turned off, it is impossible to use hot water for infusions or
steam delivery.
4.6 Espresso Brewing
1. Unfasten the portafilter handle (11) from the brewing group (10) and insert the filter
for one or Double Cups. Fill it with ground coffee, making sure not to leave coffee
powder on the upper edge of the portafilter handle (11), and press it with the
suitable coffee tamper provided.
2. Firmly attach the portafilter handle (11) to the brewing group (10).
3. Place one or Double Cups under the portafilter handle (11).
4. Press the button corresponding to Single Cup (24) if you want to make one coffee
or Double Cups (25) to start the delivery. Once the desired quantity of coffee
programmed is reached, the delivery automatically stops.
4.7 Volumetric Dose Programming
The programmable volumetric dosing feature allows programming of the
(24) and
Double Cup
user desires. Their use for single cup and double cup quantities is merely a
suggestion. Many users only pull double shots and program the double shot button for
1.5-2.0oz for that purpose. Then they program the
amount for use in flushing the portafilter basket and/or the group between shots. The
beauty of the programmable dosing feature is that the machine owner can be creative.
The following are the instructions for programming each button assuming they are
being used for single and double shots.
1. With the machine on, press the
3 seconds; the control light (22) and the one indicating the set temperature start
flashing.
2. Insert the single cup basket into the portafilter handle (11) and fill it with 7-8g of
ground coffee making sure not to leave coffee powder on the upper edge of the
S1 Mini Vivaldi II Owner's Manual
(25) buttons to dispense whatever quantities of espresso the
ON//OFF
Single Cup
(27) button and keep it pressed for about
Page 9
BOILER
(26)
Single Cup
button for a larger
Hide quick links:
Advertisement
Table of Contents
