Espresso Brewing; Volumetric Dose Programming - La Spaziale S1 Vivaldi II Owner's Manual

WARNING!!
To activate and deactivate the boiler mode press the
you turn on the machine, the boiler is in service.
When the boiler is turned off, it is impossible to use hot water for infusions or steam
delivery.
The machine can also operate in the economy mode (see relative paragraph).

3.4 Espresso Brewing

1. Unfasten the portafilter handle (11) from the brewing group (10) and insert the filter
for one or Double Cups. Fill it with ground coffee, making sure not to leave coffee
powder on the upper edge of the portafilter handle (11), and press it with the
suitable coffee tamper provided.
2. Firmly attach the portafilter handle (11) to the brewing group (10).
3. Place one or Double Cups under the portafilter handle (11).
4. Press the button corresponding to Single Cup (24) if you want to make one coffee
or Double Cups (25) to start the delivery. Once the desired quantity of coffee
programmed is reached, the delivery automatically stops.

3.5 Volumetric Dose Programming

The programmable volumetric dosing feature allows programming of the
(24) and Double Cup
user desires. Their use for single cup and double cup quantities is merely a
suggestion. Many users only pull double shots and program the double shot button for
1.5-2.0oz for that purpose. Then they program the
amount for use in flushing the portafilter basket and/or the group between shots. The
beauty of the programmable dosing feature is that the machine owner can be creative.
The following are the instructions for programming each button assuming they are
being used for single and double shots.
1. With the machine on, press the
3 seconds; the control light (22) and the one indicating the set temperature start
flashing.
2. Insert the single cup basket into the portafilter handle (11) and fill it with 7-8g of
ground coffee making sure not to leave coffee powder on the upper edge of the
portafilter handle, and press it with the included plastic tamper or, more optimally, a
high quality 53mm coffee tamper.
3. Fasten the portafilter handle (11) to the brewing group (10), placing a cup under the
portafilter handle.
4. By pressing the
turn on to show that the one shot espresso dose is being programmed.
5. When the coffee inside the cup has reached the desired quantity, again press the
button (24) to stop the delivery.
6. You automatically return to the initial visualization.
S1 Vivaldi II Owner's Manual
(25) buttons to dispense whatever quantities of espresso the
ON//OFF
Single Cup button (24) the delivery starts and the lights 14-15-16
Page 5
BOILER (26) button. Every t
Single Cup button for a larger
(27) button and keep it pressed for about
ime
Single Cup