Mode
ON (normal)
READY
ECO (Standby)
Energy consumption is significantly lowers in ECO (Standby) mode: only <0.5W if network is not plugged in
and 2W with network (WakeOnLan).
In ECO (Standby) mode, remote power up (Wake-on-LAN) and local power up (button) are supported.
4.3
Power mode transitions
4.3.1
General
Transition Diagram
This diagram shows all modes available on the projector (unplug, ON, READY, ECO), and the actions necessary to change mode.
ECO
READY
ON
Image 4-1
-
Projector mains powered
-
Auto transition after x minutes if ECO mode enables
-
Press power On/Off button, remote On/Off button
4.3.2
Power on projector
If not already connected, connect the female side of the power cord with the power input socket of the projec-
tor. For more details see section dedicated to the power cord installation.
R5906852 F80 SERIES 21/09/2017
Description
Projector is booted up and the light source is on
Projector is booted up but the light source is off
Light source is switched off and projector electronics are
powered down
1%
50%
50%
4. Getting Started
2
25