Lens Features - Barco F80-Q7 User Manual

9. GUI – System Settings
- Horizontal shift
- Vertical shift
- Focus
- Zoom
The text Calibration in progress will be displayed next to selected function until the calibration is completed.
When an error is detected, the message Calibration Error is displayed next to function.
9.4.5

Lens features

What can be done?
Some lens features can be disabled once they are correctly aligned so that a misalignment during a show is not possible.
How to enable/disable
1. In the main menu, System Settings → Service.
Image 9-21
2. Enter the service code.
3. In the Service menu, select Lens features.
Image 9-22
Service menu, lens features
The Lens features menu is displayed.
Image 9-23
Lens features
Depending on the lens type, different functions are available such as:
- Focus
- Horizontal lens shift
- Vertical lens shift
- Shutter
- Zoom
4. To enable/disable a feature, click on the slider and drag it to the left to disable the feature or the right to enable the feature.
When enabled, the slider becomes blue;
When disabled, the slider is gray.
66 R5906852 F80 SERIES 21/09/2017