Power Modes; Power Mode Transitions; General - Barco F80 Series User Manual

Getting Started

4.2 Power modes

General

The table below details the F80 power modes.
Mode
ON (normal)
READY
ECO (Standby)
Energy consumption is significantly lowers in ECO (Standby) mode: only <0.5W if network is not
plugged in and 2W with network (Wake-on-LAN).
In ECO (Standby) mode, remote power up (Wake-on-LAN) and local power up (button) are
supported.

4.3 Power mode transitions

4.3.1 General
Transition Diagram
This diagram shows all modes available on the projector (unplug, ON, READY, ECO), and the actions
necessary to change mode.
ECO
READY
ON
Image 4-1
-
Projector mains powered
-
Auto transition after x minutes if ECO mode enables
-
Press power On/Off button, remote On/Off button
36 R5906852-01 F80 series
Description
Projector is booted up and the light source is on
Projector is booted up but the light source is off
Light source is switched off and projector electronics
are powered down
1%
50%
50%