8. GUI – Installation
Image 8-9
Warp Menu, Screen Size
The Screen Size menu is displayed.
Image 8-10
Screen size
2. Select either Screen width or Screen height.
3. Set the new value to shrink either the width or height of the warp outline so that the outline is equal with the active source.
Tip:
A red border will be projected along with the current image. The border is a visual tool, showing the result of the adjusted
outline.
4. Click Apply.
8.3.4
Warping – 4 corners adjustment
About 4 Corners adjustment
4 corner adjustment is typically used when the mechanical installation of the projector prevents it from pointing perpendicularly at
the screen. For example, you can overshoot the screen and use 4 corner adjustment to pull your projected image corners back into
the screen.
Some examples:
Image 8-11
4 corner adjustment
How to adjust the image?
1. In the main menu, select Installation → Warp → 4 Corners.
46
R5906852 F80 SERIES 21/09/2017