Table of Contents
Advertisement
6 Data Recorder
Editing a file comment list
If necessary, you can change and complete the com-
ments of a file comment list which have been automati-
cally generated from the master comment list.
6-22
– Load a Data Recorder file (see Section Loading a
file, page 6-14).
– In the function group DR, select the function PROP-
ERTIES.
– Press one of the left or right arrow keys. The file
properties are displayed.
– Press the left or right arrow key in order to select the
group COMMENT.
The file comment list is displayed, and the comments al-
ready used are marked with a cross before the code let-
ter.
– Press one of the up or down arrow keys in order to
select a list item.
– Press one of the left or right arrow keys in order to
start the entry of the comment.
– Press the arrow keys to mark the first character.
– Press the center key of the keypad to select the
marked character.
Edition 4 (05/2014)
Saving measurement results
DMS Go+
Advertisement
Table of Contents
