Enabling Options (Upgrade) - GE DMS Go+ Operating Manual

5 Operation

5.16 Enabling options (Upgrade)

The DMS Go+ is equipped with various options, e.g. for
the measurement method TopCOAT. You can enable
these options by entering the corresponding codes.
5-54
N o t e
To order options, you need the serial number
of your instrument (please see function
ABOUT in the function group CONFIG).
– In the function group CONFIG, select the function
CODE.
– Press one of the up or down arrow keys and enter
the first character of the code.
– Press the left arrow key in order to select the next
character of the code, and enter the other characters
of the code.
– Finally, press the function key 2 (function CON-
FIRM).
If the code you have just entered is correct, the option is
enabled and is immediately available.
– Select the function ABOUT.
– Press one of the left or right arrow keys in order to
display the start display including the information
about the options available.
Edition 4 (05/2014)
Enabling options (Upgrade)
DMS Go+