Eu Declaration Of Conformity; Manufacturer/Service Addresses - GE DMS Go+ Operating Manual

10 Appendix

10.6 EU Declaration of Conformity

The DMS Go+ conforms to the requirements of the fol-
lowing EU directives:
● 89/336/EEC (Electromagnetic compatibility)
The conformity with the requirements of the
EU directive 89/336/EEC is proven by the observance
of the standard specifications
● EN 55 011:1998, Class A, Group 2, and
● EN 61 000-6-2:2005
● EN 61 000-6-4:2001
The conformity with the requirements of the EU directive
73/23/EEC, amended by 93/68/EEC, is proven by the
observance of the standard specification
● EN 61 010-1:2001
10-24
10.7 Manufacturer/Service
addresses
The ultrasonic thickness gauge DMS Go+ is manufac-
tured by:
GE Sensing & Inspection Technologies GmbH
Robert-Bosch-Straße 3
50354 Hürth
Germany
T +49 (0) 22 33 601 111
F +49 (0) 22 33 601 402
The DMS Go+ is manufactured according to the state-
of-the-art methods using high-quality components.
Thorough in-process inspections or intermediate tests
and a quality management system certified to DIN EN
ISO 9001 ensure an optimum quality of conformance
and workmanship of the instrument.
Should you nevertheless detect an error on your instru-
ment, power the instrument off and remove the batter-
ies. Inform your local GE customer service and support,
indicating the error and describing it.
Edition 4 (05/2014)
EU Declaration of Conformity
DMS Go+