Choosing The Probe Type - GE DMS Go+ Operating Manual

Preparing for measurements

Choosing the probe type

After connecting a suitable probe for the task, you have
to choose the probe type to adjust the DMS Go+ to the
probe.
The choice of measurement modes as well as individual
functions and parameters available likewise depends on
the selected probe type. The composition of the individ-
ual function groups varies accordingly.
You have a choice between the following probes:
● A2 DFR ● CA211A
● D790 ● DA301
● DA312 ● DA312B16
● DA503 ● DA507
● DA590 ● DIALOG
● FH2E ● HT400A
● KBA560 ● TC560
DMS Go+
– In the function group PROBE&CAL, select the func-
● OSS10
– Choose the connected probe. The instrument is im-
● DA303
● DA501
● DA512
● DP104
● KBA525
Edition 4 (05/2014)
N o t e
When a dialog probe (probe designation
DA4... or ...-D) is connected, the DMS Go+
receives the necessary data from the probe
automatically. In that case, you don't have to
choose the probe type any more. It is auto-
matically entered after connecting the probe.
tion PROBE.
mediately adjusted.
5 Operation
5-21