GE DMS Go+ Operating Manual page 87

Default settings
Enabling individual setup functions
– In the function group CONFIG, select the function
LOCKOUT.
– Press the left or right arrow keys. A selection menu
is displayed.
– Press one of the left or right arrow keys in order to
select the function group.
– Press one of the up or down arrow keys in order to
select the function.
DMS Go+
– Press the center key of the keypad in order to exclude
the selected function from the general lockout. The
function is marked with a cross.
– Select other exceptions in the same way.
– Finally, press the function key 2 (function CONFIRM)
in order to exit the selection menu and to save the se-
lection.
– Check whether the marked functions are visible in the
corresponding function groups and can be changed
or set.
Edition 4 (05/2014)
5 Operation
5-9