Operation; File Review - GE Druck DPI611 User Manual

User Manual
To start Data Logging Mode:
1. Select appropriate options and enter filename for Data Log
file.
Note: When entering filename it is first necessary to select
destination (INTERNAL or USB FLASH DRIVE)
2. Select the
3.2

OPERATION

In periodic mode, to begin data logging tap 'Start logging'
button.
In Key press mode, a data point is taken every time the user taps the
log button
To stop Data Logging select
The data logging indicator
reading is logged.
3.3

FILE REVIEW

DASHBOARD >>
To view a data file point by point do the following:
1. Tap the Filename button to display the list of data files.
2. Select the file to be displayed.
3. Tap
4. To step the display one data point, tap the Next Log
button
Page 57 of 79
button.
to see the data display.
.
Note: The data point number sequence is displayed in the
top right-hand corner (e.g. 4 of 100).
flashes to indicate whenever a
DATA LOGGING>> RECALL
[EN] English – K0571 Issue 1
Druck DPI611