Default settings
Configuring data boxes
You can use the function RESULTS to choose the data
to be displayed in the six data boxes at the top of the
screen display (see Section Icons and information,
page 4-5).
DMS Go+
You have a choice between the following data:
● OFF (no display)
● P-DLY (probe delay)
● LOC (measuring location)
● M-GAIN (maximum gain setting)
● TEMP (material temperature setting)
● GAIN (current gain)
● T-THK (temperature-compensated wall thickness)
● THK (measured wall thickness)
● C-THK (coating thickness in the operating mode
TopCOAT)
Edition 4 (05/2014)
5 Operation
5-13