Inserting The Sd Memory Card - GE DMS Go+ Operating Manual

3 Initial start-up

3.4 Inserting the SD memory card

You can use any standard SD memory card in the DMS
Go+. To insert and to remove the memory card, you
have to open the watertight cover at the top of the instru-
ment.
– Push the lock of the hinged cover (1) in the direction
of the arrow in order to open the cover.
– Insert the SD memory card into the card slot so that
the contacts (2) of the card face the instrument front
side.
– Press the card down into the card slot until it locks
into place.
– Close the cover and make sure that it is locked tightly.
If necessary, push the lock up to the limit stop in the
opposite direction of the arrow in order to close the
cover watertight again.
– To remove the SD card, open the cover and shortly
press down the card to unlock it.
3-10 Edition 4 (05/2014)
Inserting the SD memory card
2
1
DMS Go+