Parameter Window A: Fan (Multi-Level) - ABB i-bus KNX FCL/S 1.6.1.1 Product Manual

®
ABB i-bus KNX
Start-up
3.2.2.1

Parameter window A: Fan (Multi-level)

All settings for output A are made in this parameter window.
These explanations also apply to outputs C, D, E if the parameter Output C, D, E in
Enable outputs
All settings for the Multi-level fan are made in this parameter window.
Fan type
Option:
This parameter defines the fan type which is to be controlled.

Multi-level: Controls a fan with up to three speeds.

One-level: Controls a fan with one speed.
Limit fan speeds to 2
Option:
The fan speeds can be limited to two here. The following settings are the same as those for a three-speed
fan, except that they apply only to two speeds.

No: A three-speed fan is controlled.

Yes: A two-speed fan is controlled via fan speeds 1 and 2. Fan speed 3 is non-functional.
A...F, p.20 is set to Enable as fans.
Multi-level
One-level
No
Yes
Parameter window
FCL/S x.6.1.1 | 2CDC508116D0203 21