®
ABB i-bus
KNX
General
1
General
The Blower Actuator FCL/S x.6.1.1 is used in ventilation applications.
It is a compact device that serves the following functions:
Controlling fans and blowers
Switching loads
Outputs that are not being used for fan functions can be used as switch actuators for switching electrical
loads.
1.1
Using the product manual
This manual provides detailed technical information on the function, installation and programming of the
ABB i-bus® KNX device.
This manual is divided into the following chapters:
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter A
General
Device technology
Start-up
Planning and application
Appendix
FCL/S x.6.1.1 | 2CDC508116D0203 3