Output Functions - ABB i-bus KNX FCL/S 1.6.1.1 Product Manual

®
ABB i-bus KNX
Start-up
3.1.1

Output functions

The following table provides an overview of the functions possible when you combine the device outputs
with the Switch Blower 1f 6A/1.0 (FCL/S 1.6.1.1) or Switch Blower 2f 6A/1.0 (FCL/S 2.6.1.1) application.
Output functions
Fan
NO contact/NC contact
Time
Staircase lighting
 = Function is supported
* FCL/S 2.6.1.1 only
Note
Outputs C, D and E can also be programmed as switch actuators. The settings options are described in
Parameter window A: Fan
16 2CDC508116D0203 | FCL/S x.6.1.1
(Multi-level), p.21.
A B C, D, E*
 
 
 
F*

