Boot Other Device; Swap Floppy Drive - AXIOMTEK SBC84820 Series User Manual

®
SBC84820 Pentium M All-in-One Capa Board User's Manual
Enabled
Disabled
First/Second/Third Boot Device
These items allow the selection of the 1
system will search for during its boot-up sequence. The wide range of
selection includes Floppy, LS120, ZIP100, HDD0~3, SCSI, and CDROM.

Boot Other Device

This item allows the user to enable/disable the boot device not listed on
the First/Second/Third boot devices option above. The default setting is
Enabled .

Swap Floppy Drive

This allows you to determine whether to enable Swap Floppy Drive or not.
When enabled, the BIOS swap floppy drive assignments so that Drive A
becomes Drive B, and Drive B become Drive A. By default, this field is
set to Disabled.
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive type, 40 or 80
tracks, installed in the system. 360Kb type is 40 tracks while 720Kb,
1.2MB and 1.44MB are all 80 tracks. The default value is "Enabled" .
BIOS searches for floppy disk drive to determine if it
Enabled
is 40 or 80 tracks. Note that BIOS can not tell from
720K, 1.2M or 1.44M drives type as they are all 80
tracks.
BIOS will not search for the type of floppy disk drive
Disabled
by track number. There will be no warning message
displayed if the drive installed is 360K.
42
Enable Quick POST
Normal POST
st nd rd
, 2 , and 3 devices that the
Award BIOS Utility