Mitsubishi Q2ACPU User Manual page 138

8. DEBUGGING FUNCTION
(c) Setting the execution operation
Set the scan time, interrupt status, and refresh, at "3. Option" on "Partial Run"
screen.
*Multiple setting can be made.
The following shows all settings.
Item
Designates whether QnACPU executes the scan time by the actual time or by
Scan time
the designated time. (Default: designated time 10ms)
Designates whether or not interrupts are prohibited during execution.
Interrupt status
(Default: "Inhibit")
Designates whether QnACPU executes I/O refresh whenever program
execution is stopped due to satisfaction of a condition, or executes only at END
Refresh
processing.
(Default: "Successively")
Description
8 - 46