Mitsubishi Q2ACPU User Manual page 555

APPENDICES
(5)
(6)
(7)
Monitor using GX Developer
Processing time in the case of monitoring by GX Developer
The processing time is added when monitoring by GX Developer.
(a) The following table shows the processing time when data register 64 points are
set for registration monitor:
CPU Module
Q2ACPU(S1)
Q3ACPU
Q4ACPU
(b) The following shows the processing time when monitor conditions are set.
CPU Module
Q2ACPU(S1)
Q3ACPU
Q4ACPU
Local device
Processing time when the local device is used
The processing time is added when the local device is used.
CPU Module
Q2ACPU(S1)
Q3ACPU
Q4ACPU
Condition: loca device setting: 1 k point, n: number of program files
Multiple program execution
Overhead time when executing each program that executes several programs in the
QnACPU.The processing time is added when several programs are executed..
CPU Module
Q2ACPU(S1)
Q3ACPU
Q4ACPU
Condition: n:number of program files
Agreement in
Designated Step
App - 158
Processing Time
0.46ms
0.35ms
0.18ms
Processing Time
Agreement in
Designated Device
0.38ms 0.38ms
0.29ms 0.29ms
0.15ms 0.15ms
Processing Time
3.0 (n - 1) + 2.8ms
2.2 (n - 1) + 2.1ms
1.1 (n - 1) + 1.1ms
Processing Time
0.21 nms
0.16 nms
0.08 nms