Processing For Data Communication Requests From A Special Function Module - Mitsubishi Q2ACPU User Manual

6. DATA COMMUNICATIONS WITH SPECIAL FUNCTION MODULES
6.3

Processing for Data Communication Requests from a Special Function Module

When a data communication request is received from a special function module such as a
serial communication module, the QnACPU performs the processing for the data
communication request at the END processing.
The QnACPU can process all the data communication requests received in one scan with
one END processing, according to the parameter settings. In this case, the data lag to
each module is eliminated, but the END processing is extended by the data
communications request processing.
Data communications request batch processing is set in the "6. General Data
Processing"on the "PC system" screen in the GPP function parameter mode.
The setting range is 1 to 6 modules, and the processsing can be set per module.
6 - 5