Verifying Gvrp Configuration - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

Configuring GVRP

Verifying GVRP Configuration

A summary of the commands used for verifying GVRP configuration is given here:
clear gvrp statistics
show gvrp last-pdu-origin
show gvrp configuration
show gvrp configuration port
show gvrp configuration link-
agg/port
show gvrp timer
For more information about the displays that result from these commands, see the OmniSwitch CLI Refer-
ence Guide.
OmniSwitch AOS Release 6 Network Configuration Guide
Clears GVRP statistics for all the ports, an aggregate of ports, or a spe-
cific port.
Displays the source MAC address of the last GVRP message received
on a specified port or an aggregate of ports.
Displays the global configuration for GVRP.
Displays the GVRP configuration status for all the ports.
Displays the GVRP configuration for a specific port or an aggregate of
ports.
Displays the timer values configured for all the ports or a specific port.
September 2009
Verifying GVRP Configuration
page 5-13