Switching The Server On And Off - Fujitsu PRIMERGY 300 Operating Manual

Switching the server on and off

a = Main switch
b = ON/OFF switch
c = Power On display
With the main switch (a) you can switch the server off (position 0) or ready-to-
operate (position 1). If the server is switched off, the ON/OFF switch (b) is
disabled. When the server is ready to operate, it can be switched on using the
ON/OFF switch or via a signal. If you press the ON/OFF switch again you reset the
server to ready mode.
The main switch and the ON/OFF switch do not disconnect the server
i
from the line voltage. To disconnect the line voltage completely, remove
the power plug from the grounded power outlet.
A26361-K423-Z202-3-7619
Preparation for use and operation
a
c
0 = Server is switched off
1 = Server is ready-to-operate
0
1
b
19