Operating Bios Setup - Fujitsu PRIMERGY 300 Operating Manual

Operating BIOS Setup

Operating BIOS Setup
If you change entries in BIOS Setup, make a note of the changed entries (e g. in the
technical manual for the system board), or print out the changed screen page. To
do so, the printer must be connected to the server through the parallel interface.
Selecting menus
Use the key å å or ç
å å
Selecting fields or submenus
Use the key Ê Ê Ê or Ë Ê
Selecting a submenu (marked with Ê )
Select the corresponding field, and press the Enter key. Press the [Esc]
from the submenu to its superior menu.
Changing fields
Use the key [+] [+] or [-] [-] [-] [-] of the numeric bloc.
[+] [+]
To set the default entries for the selected menu
Use the function key [F9]
Reverting the fields of the selected menu to the entries that were in effect
when BIOS Setup was called
Use the function key [F7]
Printing a screen page
Use the key combination Shift + [Print]
A26361-K423-Z202-3-7619
ç .
ç ç
Ë . The field selected is highlighted. Ë Ë
[F9].
[F9] [F9]
[F7].
[F7] [F7]
[Print]. [Print] [Print]
Settings in BIOS Setup
[Esc] to return
[Esc] [Esc]
31