Preparation for use and operation
Ports for external devices
The ports for external devices are on the rear of the server. Which ports are
available on your server depend on the boards installed. The ports are indicated
by symbols. The following figure shows the symbols for the standard ports.
1
1 = Keyboard port
2 = PS/2 mouse interface
3 = Serial interface
Some of the devices that you connect require special drivers (see the
i
documentation for the connected device).
Connecting the keyboard
Plug the round plug of the keyboard cable into the keyboard port on the
Ê
server.
Ê
Plug the other connector of the keyboard cable into the socket on the
underside of the keyboard.
14
2
3
4
4 = Parallel interface
5 = Monitor interface
5
A26361-K423-Z202-3-7619