Important Notes; Safety - Fujitsu PRIMERGY 300 Operating Manual

Important Notes

In this chapter you will find information regarding safety which it is essential to take
note of when working with your server. The manufacturer's notes contain helpful
information on your server.

Safety

Pay attention to the information provided in the manual "Safety and
!
ergonomics".
•
During installation and before operating the device, observe the instructions
on environmental conditions in the chapter entitled "
the instructions in the chapter
•
Please check whether the workstation is set to the local power supply (see
chapter "Preparation for use and
•
The main switch and the ON/OFF switch do not disconnect the server from the
line voltage. To disconnect the line voltage completely, remove the power plug
from the grounded power outlet.
•
When cleaning the server observe the relevant notes in the chapter
"Preparation for use and
•
When connecting and disconnecting cables, observe the relevant notes in the
chapter „Preparation for use and
•
Replace the lithium battery on the system board in accordance with the
instructions in the Technical Manual for the system board.
•
The CD-ROM drive contains a light-emitting diode (LED), classified according
to IEC 825-1:1993:LASER CLASS 1.
•
Keep this Operating Manual together with your device. If you pass on the
device to third parties, you should also pass on the Operating Manual.
Warning
The lithium battery of the device may only be replaced by one that is
!
identical or by a type recommended by the vendor. If the lithium battery
is not replaced in the proper manner, there is a danger of explosion (see
the Operating Manual for your device).
A26361-K423-Z202-3-7619
"Preparation for use and
operation").
operation".
operation".
Technical data" as well as
operation".
3