Working With Floppy Disks And Cd-Roms; Cleaning The Server - Fujitsu PRIMERGY 300 Operating Manual

Working with floppy disks and CD-ROMs

Follow the instructions supplied by the vendor of the floppy disks.
!
Never clean the server's floppy disk drives with cleaning disks. Even just
one attempt would destroy the read/write head in the disk drive within 20
seconds.
Avoid touching the surface of a CD. Handle CDs only by their edges!
!
Always store CDs in their cases. You avoid dust contamination,
scratches, bending or other damage.
Protect your CDs from dust, mechanical vibration and direct sunlight!
Avoid storing a CD in areas subject to high temperatures or humidity.

Cleaning the server

Turn off all power and equipment switches and pull the power plug out of
!
the utility power socket.
Do not clean any interior parts yourself, leave this job to a service
technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic.
Ensure that no liquid enters the system.
Ensure that the ventilation areas of the server and the monitor are free.
Wipe the server and monitor housing with a dry cloth, or if particularly dirty, use a
cloth which has been moistened in mild domestic detergent and then carefully
wrung out. If particularly dirty, use a cloth which has been moistened in mild
domestic detergent and then carefully wrung out.
Use a cloth for disinfection to clean the keyboard and the mouse.
A26361-K423-Z202-3-7619
Preparation for use and operation
27