Table of Contents
Advertisement
Troubleshooting and tips
Starting at the welcome screen and the error message, proceed as follows:
Ê
Press the Enter key.
The main menu appears.
Select the item Configure computer and press the Enter key.
Ê
The system loads the configuration files and the Steps in configuring your computer
menu appears.
Select the item Step 2: Add or remove boards and press the Enter key.
Ê
The Step 2: Add or Remove Boards screen appears.
Press the function key [F10]
Ê
The Steps in configuring your computer menu appears again.
Ê
Select the item Step 3: View or Edit Details and press the Enter key.
Check to ensure that the following settings are correct.
Ê
−
memory size
−
floppy disk drives
−
hard disk drives
−
Video mode
Ê
Press the Enter key.
The Save and exit screen appears.
Select the item Save the configuration and restart the computer and press the
Ê
Enter key (if necessary, more than once) to bring up the Reboot screen.
Ê
Press the Enter key to restart the system.
Having run through its self-test, the server starts the EISA configuration utility from
the floppy disk.
Confirm the Logo and welcome screens by pressing the return key.
Ê
The main menu appears.
Select the item Maintain system configuration diskette and press the Enter key.
Ê
The Maintain System Configuration Diskette menu is displayed.
Select the item Load SCI file and press the Enter key.
Ê
The Open System Configuration Information (SCI) file menu appears.
44
[F10].
[F10]
[F10]
The system cannot be started up
A26361-K423-Z202-3-7619
Advertisement
Table of Contents
